Filter
Top Products
Shutdown and Cleaning
18 312001G
12. To preserve paint
in hose:
a. Point gun
into paint
pail.
b. Unlock gun
trigger lock.
c. Pull and hold
gun trigger.
d. Turn
Prime/Spray
valve to
SPRAY.
e. Turn power
switch ON.
f. Continue to hold gun trigger until you see
paint diluted with flushing fluid starting to
come out of gun.
13. While continuing to trigger
gun, quickly move gun to
redirect spray into waste
pail. Continue triggering
gun into waste pail until
flushing fluid dispensed
from gun is relatively
clear.
14. Stop triggering
gun. Engage the
trigger lock.
15. Turn prime/spray
valve to Prime.
16. Turn power switch
OFF.
17. Clean InstaClean Fluid Filter and gun, page 21.
18. Fill unit with Pump Armor
™
storage fluid. Read
Long Term Storage, page 22.
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately
1-quart (1-liter) of paint.
ti9345a
ti5580a
(SG10)
ti8922a
ti8909a
(SG20)
ti9745a
ti8908a
(
SG20
)
ti8923a
(
SG10
)
ti9346a
ti2018a