Filter
Top Products
G0527 18" Wide Belt Sander -15-
Floor Mounting
To mount the sander to the floor:
The sander needs to be mounted in a level loca-
tion where it can be easily serviced from all sides.
Also, consider the largest workpiece you might
need to sand before deciding on a final position.
Mount the sander to wooden floors with
1
⁄2" lag
bolts and washers. Mount the sander to concrete
floors with
1
⁄2" anchor-style bolts designed for
concrete applications. Note—Be sure to carefully
follow the anchor bolt manufacturer’s instructions.
Beginning Assembly
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Sharp edges on metal
parts may cause person-
al injury. Examine the
edges of all metal parts
before handling.
This section will cover the basic assembly and
adjustment instructions needed to begin opera-
tion. Complete the assembly in the order provid-
ed in this manual and then read the remaining
portion of the manual before attempting any type
of operation.
Your safety is important! Please follow the
warnings below during this entire section:
OFF
ON
Disconnect power to
the machine during the
entire assembly
process. Failure to do
this may result in seri-
ous personal injury.