Filter
Top Products
G1028Z/G1029 Dust Collector -7-
SECTION 3: INTRODUCTION
Grizzly Industrial, Inc. is proud to offer the Model
G1028Z/G1029 Dust Collector. These dust col-
lectors are a part of Grizzly’s growing family of
fine machinery. When used according to the
guidelines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The G1028Z/G1029 Dust Collector represents the
mid-range of our broad line of dust collectors.
Standard features for both dust collectors include
a push button switch, cyclone collector, and two
large filter/collection bags. The G1028Z has a 1
1
⁄2
H.P. motor which is pre-wired for 110V and has a
6" intake port. Air movement is 1400 cubic feet
per minute with a static pressure of 9". The G1029
features a 2 H.P. motor which is pre-wired for
220V and has a 6" inlet. Air movement is 1600
cubic feet per minute with a static pressure of 11".
We also offer a full line of optional accessories to
build a collection system for a single machine or a
complete shop including a two-stage adapter and
a dust collection reference book. All accessories
are offered through the current Grizzly catalog.
We are also pleased to provide this manual with
the Model G1028Z/G1029. It was written to guide
you through assembly, review safety considera-
tions, and cover general operating procedures. It
represents our effort to produce the best docu-
mentation possible. If you have any comments
regarding this manual, please write to us at the
address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Commentary
Most important, we stand behind our machines. If
you have any service questions or parts requests,
please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1028Z/G1029 as supplied when the manual
was prepared. However, owing to Grizzly’s policy
of continuous improvement, changes may be
made at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge you
to insert the new information with the old and keep
it for reference.
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.