Filter
Top Products
-10- G1028Z/G1029 Dust Collector
SECTION 4: ASSEMBLY
Beginning Assembly
We have organized the assembly process into
steps. Please follow along in the order presented
here.
Tools Required: 12mm open end wrench, regu-
lar and Phillips head screwdriver.
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Figure 2. Mounting casters to base.
Base
Position the base plate upside down and locate
the casters so they are within easy reach. Mount
the casters to the base plate using sixteen (16)
5
⁄
16"-18 x
1
⁄
2" hex bolts provided. See Figure 2.