Filter
Top Products
6.
Figure 14
Figure 15.
7.
Step 4
Step 5
Wall Mounting
Page 17
8.
Figure 13Page 19
Note: When installing the two bolts above
the intake port, use duct tape on the bottom
of your wrench to hold the bolts in place, as
shown in Figure 15, to start the bolts easier.
Figure 14.
9.
Figure 16
Note: At the places where you see 3 holes in
a row, only use the center hole for this step.
The two outside holes are only designed for
use with the optional stand.
Figure 16.
10.
11.
Figure 17
Figure 17.