Filter
Top Products
Model G0443 (Mfg. Since 11/09)
-19-
12. Attach the outlet port and filter L-braces to
the blower housing with the outlet gasket
between the outlet port and the housing, as
shown in Figures 18–19, using (8)
5
⁄16"-18 x
1" hex bolts, (16)
5
⁄16" flat washers, and (8)
5
⁄16"-18 hex nuts.
Note: One of the braces attaches directly to
the housing with the following hardware: (2)
5
⁄16"-18 x 1" hex bolts, (4)
5
⁄16" flat washers,
and (2)
5
⁄16"-18 hex nuts.
13.
Mount the filter to the L-braces with the brace
gaskets between them, as shown in Figure
20
, using (4)
5
⁄16"-18 x
3
⁄4" hex bolts and (4)
5
⁄16" fender washers.
Figure 20.
Mounting filters to the braces.
Brace Gasket Here
Figure 18. Outlet port and filter L-braces
installed.
Figure 19.
Model G0443 outlet port and filter
L-braces installed.
Outlet Gasket Here
14. Apply the 3 x 15mm foam tape to the edges
of the outlet port and the canister adapter, as
shown in Figure 21.
Note:
It may be necessary to reposition the can-
ister L-braces down one bolt hole or shorten the
length of the longer piece of flexible hose to acco-
modate the bend in the hose.
Figure 21. Foam tape applied to the outlet port
and canister adapter.
Foam
Tape
x 4