Grizzly G0514 Saw User Manual


  Open as PDF
of 68
 


Positive Stop
Personal injury or death
can occur if the bandsaw
starts during table adjust-
ments. Disconnect power
from the bandsaw before
performing table adjust-
ments.
        


To set up the positive stop:
1. 
2. 
Figure 19
3.        

4. 

Figure 19.
5. 

Figure 19
If the blade is square with the table sur-
face:    



If the blade is NOT square to the table
surface:   
       


       

Figure 20.






 previous next