Grizzly G0514 Saw User Manual


  Open as PDF
of 68
 




To adjust the fence parallel to the miter slot:
1.   

2. 

3.  


4. 


    
 Figure 24 



Figure 23.

Figure 24.



Fence Adjustment
      

To adjust the miter slot square to the blade:
1.      

2.        
     

3.        
       
Figure 23


Table Alignment
NOTICE
Adjusting the fence parallel to the miter
slot does not guarantee straight cuts. The
miter slot may need to be adjusted parallel
to the side of the blade. Refer to the "Table
Alignment" instructions.
 previous next