Filter
Top Products
G0565 Adjustable Sponge Sander
-15-
Belt Tilt
The sanding belt rotates 360˚ to best meet the
needs of your sanding operation.
To adjust the sanding belt tilt:
1. Disconnect the machine from the power
source!
2. Loosen the belt tilt lock lever (see Figure 8.)
Figure 8. Belt tilt lock lever.
3. Rotate the sanding belt to the desired angle.
4. Tighten the belt tilt lock lever.
Dust Hoods
The dust hoods easily tilt to funnel the maximum
amount of dust into the dust collection system.
Tools Needed: Qty
Wrenches 19mm ...............................................
2
To adjust the sanding belt tilt:
1. Disconnect the machine from the power
source!
2. Hold the exterior hex nut with a wrench and
loosen the interior hex nut (see
Figure 9).
Figure 9. Dust hood lock nuts.
3. Rotate the dust hood to the desired angle.
4. Hold the exterior hex nut with a wrench and
tighten the interior hex nut.
Belt Tilt
Lock Lever