Filter
Top Products
G0583 1 HP Canister Dust Collector -21-
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
Regular periodic maintenance on your Model
G0583 Canister Dust Collector will ensure its
optimum performance. Make a habit of inspecting
your machine each time you use it. Check for the
following conditions and repair or replace when
necessary:
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Any other condition that could hamper the
safe operation of this machine.
5. Do not let collection bags get completely
full.
Disconnect power to the
machine when perform
-
ing any maintenance,
assembly or adjust
-
ments. Failure to do this
may result in serious
personal injury.
Wear safety glasses dur-
ing the entire mainte
-
nance process. Failure
to comply may result in
serious personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Always wear a respirator or dust mask and safety
glasses when emptying the storage bag (
Figure
16). The safest opyion is to seal and discard the
entire bag and its contents. Small dust particles
can escape the bags during emptying, causing
them to become airborne and easily inhaled. This
microscopic airborne dust is extremely unhealthy
to breathe and can cause serious health prob-
lems.
Grizzly offers replacement plastic collection bags
(Part Number H2290) and canister filters for your
Model G0583 Canister Dust Collector.
Bag and Canister
Cleaning
Lubrication
Schedule
SECTION 6: MAINTENANCE
Figure 16. Safely disposing of wood dust.