Filter
Top Products
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored, seri-
ous personal injury may occur.
Safety Instructions for Table Saws
8. CROSSCUTTING OPERATIONS.
9. BLADE HEIGHT.
10. WORKPIECE SUPPORT.
11. DAMAGED SAW BLADES.
12. DADO AND RABBET OPERATIONS
13. CUTTING CORRECT MATERIAL.
14. EXPERIENCING DIFFICULTIES.
1. SAFETY GUARDS.
The blade cuts com-
pletely through the top of the workpiece on
through-sawing operations.
2. KICKBACK.
Until you have a clear understanding
of kickback and how it occurs, DO NOT oper-
ate this table saw!
3. REACHING OVER SAW BLADE.
hands or arms
could be pulled into the saw blade if kickback
occurs.
4. WORKPIECE CONTROL.
5. SAFETY ACCESSORIES.
6. OPERATOR POSITION.
7. CUT-OFF PIECES.OFF