Filter
Top Products
Digital Readout
To set the digital readout:
1.
Blade Tilt
StopsPage 51
2.
Figure 76
3.
Note:If you move the blade angle handwheel
when the power is disconnected, the digital
readout will be incorrect when the saw is
reconnected, and you will need to reset it.
Figure 76
Miter Slot to Blade
Parallelism
Figure 77.
Tools Needed Qty
Note: For safest and most accurate adjustments,
use a Superbar and Master Plate (see Figure 61
on Page 45).
To adjust the blade parallel to the miter slot:
1.
2.
Figure 77.