Test Run & Spindle
Break-in
To test run and break-in the spindle bearings:
1 ed
Lubrication Section 6: MAINTENANCE
Page 36.
2
3.
Figure 16
Figure 16.
4. .
5
Figure 1 Page 3
6.
Failure to follow start up and spindle break-
in procedures will likely cause rapid deteri-
oration of spindle and other related parts.
NOTICE
10
11.
12. OFF.
13.
DO NOT leave the area while break-in pro-
cedure is under way. You must be ready to
stop the machine if a problem occurs.
NOTICE
7.
Step 8
8.
9.