Filter
Top Products
2. Figure
29
Note: For maximum spindle rigidity when
milling, keep the spindle retracted into the
headstock as far as possible with the quill
lock lever locked and with the fine feed lock
knob tightened.
Headstock Travel
(Z-Axis and Rotation)
To raise or lower the headstock:
1.
Figure 29
To tilt the headstock to the left or right:
1.
Figure 29.
Figure 30.
2.
Figure 30
During the following steps, be aware that the
headstock is top-heavy and will swing if it is
not well supported once the center bolt and
lock nut are loosened. Always support the
headstock with one hand when loosening
these fasteners. Failure to do so may result
in unexpected movement of the headstock,
causing damage to the machine and per-
sonal injury.
3.