Grizzly G0705 Drill User Manual


  Open as PDF
of 60
 


4.   Page 32   


       



Tip: For a permanent installation, chill the arbor
in the freezer for 15 minutes before performing the
following procedure. The taper will expand as it
returns to room temperature, permanently locking
the chuck.
To install the drill chuck onto the arbor:
1.         
     
        

2. 

3.  

    Figure 38   

Note: While it may not seem like there is
anything keeping the drill chuck in place, the
MT#3 taper fit provides a strong bond and will
hold the drill chuck tightly.




     



        

To use the drift key:
1. 
2. 


3. 


4. 


Figure 38.


Drill Chuck Arbor Collet Adapters
Figure 39. Adapters and drift key.





 previous next