Filter
Top Products
Tools Needed Qty
To adjust the table gibs:
1.
2.
3.
Figure 58
Gibs
The tail end of the spring is located on
the perimeter of the spring housing. This
part may be sharp! Use leather gloves or
a heavy shop towel to cover the tail while
loading or unloading return spring pres-
sure. Failure to use such precautions may
result in personal injury. Do not completely
remove the cover! If you remove the spring
cover, the spring will uncoil rapidly and
create a risk of laceration or impact injury.
Wear gloves and safety glasses during this
procedure.
Return Spring
To adjust the spring tension:
1.
2.
Figure 59.
3.
Figure 59
Figure 58. Table gib adjustment screw locations.
4.
5