Filter
Top Products
Note: It is sometimes possible to flip the
blade inside out, in which case the blade will
be installed in the wrong direction. Check to
make sure the blade teeth are facing toward
the workpiece, as shown in Figure 28, after
mounting on the bandsaw. Some blades will
have a directional arrow as a guide.
8.
9.
Blade Tension Blade Tracking
on this page & Page 28
Figure 28. Blade cutting direction.
Blade Travel
To tension the blade on the bandsaw:
1.
2.
3.
4. Figure 29
5.
Blade Tension
Figure 29.