Filter
Top Products
Remember: Too much flow at the cutting fluid
nozzles will make a mess and can make the work
area unsafe; and not enough fluid at the cut will
heat the blade, causing the blade teeth to load up
and break.
Tip: Using a refractometer or hydrometer to
replenish water in water-based coolant can extend
the life of blades and coolant, and ensure consis-
tent cutting results.
Cutting Fluid
BIOLOGICAL AND
POISON HAZARD! Use
proper personal protection
equipment when
handling cutting fluid
and follow federal, state,
and fluid manufacturer
requirements to properly
dispose of cutting fluid.
The reservoir on this machine is designed
to store cutting fluid. During storage, some
fluids grow dangerous microbes, or due to
the collection of toxic metal chips in the
fluid, the fluid can become a potent and
extremely poisonous solution to humans
and animals.
USE the correct personal protection
equipment when handling cutting fluids to
prevent infections and poisoning.
USE a good bactericide and fungicide for
additional protection.
FOLLOW federal, state, and the fluid
manufacturer requirements to properly
dispose of cutting fluid when it becomes
unsafe.
BIOLOGICAL and POISON
HAZARD!
NOTICE
Clean coolant system with a bactericide and
fungicide between coolant changes to pre-
vent recontamination.