Filter
Top Products
SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious personal
injury.
Lubrication
Cleaning the Model G0717 is relatively easy. After
using your bandsaw, remove excess chips by
sweeping. Then remove chips for recycling.
Wipe down the machine and remove any standing
coolant.
Cleaning
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
Monthly Check:
.
Annual Check:
.
Schedule
Lubricate the following areas as follows:
Blade Tension Mechanism:
Figure 50
Figure 50
Blade and Guides:
Figure 50