Filter
Top Products
II. Safety Rules for all Tools
- 2 - Hunters Meat Cutting Bandsaw
1. KNOW YOUR POWER TOOL. Read
the owner’s manual carefully. Learn the
tool’s applications and limitations, as well
as its hazards.
2. KEEP ALL GUARDS IN PLACE and
in working order.
3. GROUND ALL TOOLS. If an adapter
is used to accommodate a two-prong
receptacle, the adapter plug must be
attached to a known ground. Never
remove the grounding prong.
4. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check
that keys and wrenches are removed
from the machine before turning it on.
5. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite acci-
dents.
6. AVOID DANGEROUS ENVIRON-
MENTS. Keep your work area well
lighted.
7. KEEP CHILDREN AND VISITORS
AWAY. All children and visitors should
be kept a safe distance away from your
work area.
8. MAKE WORK AREA CHILD-
PROOF with padlocks, master switches,
or by removing starter keys.
9. DO NOT FORCE TOOL. Tools work
better and more safely when they are
allowed to work at their own speed.
10. USE THE RIGHT TOOL. Do not use a
tool or an attachment to do a job that it
was not intended to perform.
11. WEAR PROPER APPAREL. Do not
wear loose clothing, gloves, neckties, or
jewelry that might get caught in moving
parts. Non-slip footwear is also recom-
mended. Wear a hat or other protective
head wear if your hair is long.
12. USE SAFETY GLASSES AND EAR
PROTECTION.
13. DO NOT OVERREACH. Keep proper
footing and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDI-
TION. Keep tools sharp and clean for
best and safest performance. Follow
instructions for lubricating and changing
accessories.
15. DISCONNECT TOOLS FROM
POWER before servicing and when
changing accessories.
16. USE ONLY RECOMMENDED
ACCESSORIES. Consult the current
catalog for recommended accessories.
Using improper accessories may be haz-
ardous.
17. AVOID ACCIDENTAL STARTING.
Make sure the switch is in the “OFF” posi-
tion before plugging in the cord.