Filter
Top Products
-12-
G1028Z/G1029Z Dust Collector
Wear safety glasses dur-
ing the entire setup pro
-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu
-
al to become familiar with
the controls and opera
-
tions before starting the
machine!
Setup Safety
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme
-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi
-
tion of your shipment, inventory the contents.
Unpacking
This machine and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a forklift to move
heavy items.
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo
-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully
. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: Qty
A. Collector Body Assembly ........................... 1
B. Base ...........................................................
1
C. Upper Bag (Fabric) .....................................
1
D. Lower Bag (Plastic) .................................... 1
E. Lower Support Brackets .............................
2
F. Casters .......................................................
4
G. Rubber Gasket ...........................................
1
H. Upper Support Bracket ...............................
1
I. Outlet ..........................................................
1
J. Outlet Hose ................................................
1
K. Hose Clamps ..............................................
2
L. Flange Bolts
5
⁄16"-18 x
1
⁄2" ......................... 36
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
The following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
• Safety Glasses (for each person) ..............
1
• Open End Wrench 12mm ...........................
1
• Phillips Head Screwdriver ..........................
1
Items Needed for
Setup