Grizzly G1033X Planer User Manual


 


Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Basic Operation



The basic steps of operating the planer are as
follows:
1. 
2.       
        
       

3. 
      
      


4. 
5. 
      
       



    OFF 

Steps 3–5
6.     





Note:Any time you switch directions with the
handwheel, there will be a small amount of
backlash—so the first crank of the handwheel
after switching directions will be slightly less
than
1
16". However, as long as you move
the handwheel in the same direction during
operation, backlash will not be a factor.