Filter
Top Products
To adjust the height of the infeed and outfeed
rollers, chip breaker and pressure bar using
wood blocks and a feeler gauge:
1.
Note: Having the wood blocks at an even
height is critical to the accuracy of your over-
all adjustments. For best results, remove
board warpage by squaring the 2x4 with a
jointer and table saw before cutting in half.
2.
!
3.
4.
Figure 36
20" PLANER
36"
Figure 36.
5.
6.
7.
8.
Figure 33
9.
10.
Figure 35 Figure
34 Figure 33
11.