Filter
Top Products
- 8 -
XII. MACHINE DATA
GRIZZLY MODEL G1062 AND G1063 BENCH GRINDERS
Model: ........................................................................................G1062 ..................................G1063
Motor:
Type ........................................................................................TEFC ....................................TEFC
Horsepower ..........................................................................
1
/3 H.P. ..................................
3
/4 H.P.
Voltage..............................................................................110/120V ..............................110/120V
Amps ..............................................................................................4............................................8
RPMs........................................................................................3450 ......................................3450
Phase/Cycle ................................................................Single/60 HZ ........................Single/60 HZ
Bearings ............................................................................Shielded................................Shielded
Wheels:
Coarse Grit Aluminum Oxide ................................6" x
3
/4",
1
/2" hole ....................8" x 1",
5
/8" hole
Medium Grit Aluminum Oxide................................6" x
3
/4",
1
/2" hole ....................8" x 1",
5
/8" hole
Features:
Includes tool rests and eyeshields.
Specifications, while deemed accurate, are not guaranteed.
2. Turn the shaft nut counterclockwise on the right, or clockwise on the left, while holding the
wheel.
3 Remove the nut, washer, and the wheel.
4. To install a new wheel, reverse the above procedures.
XI. CLOSURE
The following pages contain machine specifications, warranty and return information, a parts dia-
gram, and a parts list.
Please write or call the appropriate regional service department if you need service assistance. Our
service staff will be glad to help you. If you wish to comment on this manual, please write to our
Bellingham, Washington location.
Thank you again for your purchase. We sincerely appreciate your business and hope we have the
opportunity to serve you again soon.