Filter
Top Products
23. DRUGS, ALCOHOL, MEDICATION. Do not operate the tool under the influence of drugs, alco-
hol, or any medication. Never operate machinery when overly fatigued.
24. DO NOT WORK IN HASTE or operate machine if you are mentally or physically fatigued.
25. IF THERE IS SOMETHING YOU DO NOT KNOW OR UNDERSTAND, DO NOT OPERATE
MACHINE! Ask for help first. Confusion can be dangerous.
26. BAD HABITS ARE DANGEROUS. Review all safety procedures often.
IV. UNPACKING
The Model G1062 and Model G1063 are each shipped from the factory in a carefully packed carton.
If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are
already gone, you will need to file a freight claim with the carrier. Save the containers and all pack-
ing materials for inspection by the carrier or their agent. Without the packing materials, filing a freight
claim can be difficult. If you need advice regarding this situation, please call us.
Caution: These grinders are relatively heavy in their packaging (approx. 25 lbs. for the G1062 and
35 lbs. for the G1063). DO NOT over-exert yourself while unpacking or moving your machine.
When you are completely satisfied with the condition of your shipment, you should inventory its
parts.
V. PIECE INVENTORY
• Bench Grinder
• Tool Rests (1 left and 1 right)
• Eyeshields and mounts (1 left and 1 right)
• Fasteners
VI. ASSEMBLY
To attach the tool rest and eyeshield assemblies:
1. Fasten the tool rest bracket to one of the three threaded holes on the lower inside portion of the
wheel housing. One of the holes is smaller than the others. We recommend using one of the
larger holes to begin with. The variability of the hole size and hole location is provided to give
you added range and flexibility.
2. Adjust the bracket so the tool rest sits flat with enough clearance between it and the wheel to
allow free rotation.
- 4 -