Figures 37–40
Figure 37.
Figure 38.
Figure 39.
Figure 40.
Sanding workpieces with high-resin content
or with applied finishes can quickly con-
taminate the sandpaper beyond the point
where it can be properly cleaned. This
will produce poor sanding results. In this
case, use a different workpiece, remove the
applied finishes, or frequently clean/replace
the sandpaper strip.
Always sand with the workpiece supported
by the table. Relying only hands to sup-
port the workpiece increases the risk of
workpiece "kick-out" and impact/abrasion
injuries.