Filter
Top Products
- 8 - Grizzly Imports, Inc. G3690
VIII. INSPECTION
WARNING: All inspections and/or any main-
tenance is to be performed with the air supply
disconnected from the tool.
Inspect and maintain the following items
daily:
1. Check the air gun for any loose bolts or
air leaks. Loose bolts should be retight-
ened. Make sure that all lock washers are
in place. Air leaks are an indication that
internal seals are worn and should be
replaced.
2. Make sure the safety nose and trigger are
functioning properly. Repair as neces-
sary. Do not use the gun with a broken or
modified safety nose.
3. The air gun should be kept clean. Wipe
off with a clean cloth daily.
4. If there is any mechanical problem with
the tool, it must be taken out of service
and repaired. If waiting for parts or repair,
the tool must be tagged “do not use” and
removed from the work area.
5. Inspect air hoses and fittings for wear and
tear and replace if necessary.
6. Inspect the air compressor to ensure that
it is operating properly. Follow the manu-
facturer’s recommended maintenance
schedule.
7. Inspect the automatic lubricating system
if applicable and fill as required. Inspect
the in-line air and water filters if applica-
ble and change or clean as necessary.
8. Inspect the compressor regulator and/or
in-line regulator to ensure that they are
set correctly. Adjust accordingly.
9. Oil regularly. See Section VI.B.