Filter
Top Products
-10- G4008/G4009 Drill Press
Figure 8.
Figure 6.
Figure 9.
1. Place the crank handle onto the raise/lower
shaft and tighten down. Figure 6.
5. Thread the column lock handle into the col-
umn bracket. Leave the lock handle loose for
now. Figure 9.
Working Table
Figure 7.
2. Insert the M16-2.0 x 40 cap screw through the
hole located on the bottom/rear of the table
bracket.
3. Thread the cap screw into the column bracket
and tighten down. Figure 7.
4. Place the table into the hole in the table brack-
et and secure with the table lock handle.
Figure 8.