Filter
Top Products
-6- G4008/G4009 Drill Press
Unpacking
The Model G4008/G4009 Drill press is shipped
from the manufacturer in a carefully packed car-
ton. If you discover the machine is damaged after
you’ve signed for delivery, please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
Caution: The G4008/G4009 is a heavy machine
(G4008-155 lbs. shipping weight; G4009-205 lbs.
shipping weight). DO NOT over-exert yourself
while unpacking or moving your machine – get
assistance. In the event that your drill press must
be moved up or down a flight of stairs, be sure
that the stairs are capable of supporting the com-
bined weight of people and the machine.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Working Table
• Column (Separate box for G4009)
• Base
• Headstock Assembly
• Motor (Separate Box)
• Motor Pulley
• Crank Handle
• Column Lock Handle
• Table Bracket
• Working Table
• Handle Bar (3)
• Hex Bolt M10 - 1.5 x 40mm (4)
• Lock Washers 10mm
• Cap Screw M16-2.0 x 40
• Wedge Shifter
• Chuck Key
• Drill Chuck
• Drill Chuck Arbor
• 4 & 12mm Allen Wrenches
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 2. Overview of all the parts.