Filter
Top Products
Safety Instructions
SAFETY
5. USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
6. ALWAYS USE SAFETY GLASSES.
Everyday eyeglasses only have impact
resistant lenses, they are NOT safety
glasses.
7. MAINTAIN TOOLS WITH CARE. Keep
tools sharp and clean for best and safest
performance. Follow instructions for lubri-
cating and changing accessories.
8. NEVER OVERREACH. Keep proper foot-
ing and balance at all times.
1. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
2. SECURE WORK. Use clamps or a vise to
hold work when practical. It’s safer than
using your hand and frees both hands to
operate tool.
3. MAKE WORKSHOP CHILD PROOF with
padlocks, master switches, or by removing
starter keys.
4. NEVER FORCE TOOL. It will do the job
better and safer at the rate for which it was
designed.
For Your Own Safety Read Instruction
Manual Before Operating This Equipment
Indicates an imminently hazardous situation which, if not
avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, MAY
result in minor or moderate injury. It may also
be used to alert against unsafe practices.
This symbol is used to alert the user to useful information
about proper operation of the equipment.
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words which are intended to convey the level
of importance of the safety messages. The progression of symbols is described below.
Remember that safety messages by themselves do not eliminate danger and are not a substi-
tute for proper accident prevention measures.
NOTICE