Filter
Top Products
G7148 12" Slip Roll -5-
CLOSURE
The following pages contain general machine
parts diagrams/lists, and Warranty/Return informa-
tion for your Model G7148 12" Slip Roll.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
General Information section. The specifications,
drawings, and photographs illustrated in this
manual represent the Model G7148 as supplied
when the manual was prepared. However, due to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
We have included some important safety mea-
sures that are essential to the operation of this
tool. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in the General Information
section.
Additional information sources are necessary to
realize the full potential of this machine. Trade
magazines, books and formal training are good
sources to begin with.
DO NOT MODIFY AND/OR USE THIS
MACHINE FOR ANY OTHER PURPOSE.
Modifications or improper use of this tool
will void the warranty. If you are confused
about any aspect of this machine, DO NOT
use it until all your questions have been
answered, or serious personal injury may
occur.
MAINTENANCE
Lubrication
Occasionally lubricate the gears with a medium
weight wheel bearing grease through the grease
fitting shown in Figure 4. Frequency of lubrication
will depend on the amount of use.
Roller shafts should also be maintained with rust
protecting oil such as Boeshield
®
T-9 or Model
G2870/G2871 in the Grizzly catalog.
Figure 4. Grease fitting.
Grease Fitting