Filter
Top Products
-34- G7209/10 14'' Table Saw
The following pages contain general machine
data, troubleshooting guide, parts diagram, parts
list and Warranty/Return information for your
Model G7209/10 Table Saw.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call the Customer Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G7209/10 Table Saw as supplied
when the manual was prepared. However, due to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
We have included some important safety mea-
sures that are essential to this machine’s opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Customer
Service Department listed in the introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
SECTION 8: CLOSURE
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant lens-
es, they are not safety glasses. Be certain
the safety glasses you wear meet the appro-
priate standards of the American National
Standards Institute (ANSI).
The Model G7209/10 was specifically
designed for woodcutting operations. DO
NOT MODIFY AND/OR USE THIS MACHINE
FOR ANY OTHER PURPOSE. Modifications
or improper use of this tool will void the
warranty. If you are confused about any
aspect of this machine, DO NOT use it until
all your questions have been answered.
Serious personal injury may occur.
Like all power tools, there is danger asso-
ciated with the Model G7209/10. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this tool
with respect and caution to lessen the pos-
sibility of operator injury. If normal safety
precautions are overlooked or ignored,
serious personal injury may occur.