Filter
Top Products
Dust Collection
To connect a dust collection hose:
1.
Figure 26
DO NOT operate your jointer without an ade-
quate dust collection system. This machine
creates substantial amounts of wood dust
while operating. Failure to use a dust collec-
tion system can result in short and long-term
respiratory illness.
Recommended CFM at Dust Port: 400 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust col-
lector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to cal-
culate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.
Before starting the jointer, make sure you
have performed the preceding assembly
and adjustment instructions, and you have
read through the rest of the manual and
are familiar with the various functions and
safety features on this machine. Failure to
follow this warning could result in serious
personal injury or even death!
Test Run
TroubleshootingPage 36
To test run the machine:
1.
2.
3.
Figures 27–28
OFF Button
T
W
I
S
T
Figure 27.
Figure 26.
2.
Note: A tight fit is necessary for proper
performance.