Filter
Top Products
Extreme Duty Planers -5-
SECTION 2: GENERAL INFORMATION
Grizzly Industrial, Inc. is proud to offer the
Extreme Duty Planers. These planers are part
of Grizzly’s growing family of fine woodworking
machinery. When used according to the guide
-
lines stated in this manual, you can expect years
of trouble-free, enjoyable operation.
The Extreme Duty Planers are the same machine
with the exception of the motor size, electrical
phase and cutterhead differences. Please refer
to the chart below to distinguish planer differ
-
ences.
These planers are intended for heavy-duty pro
-
fessional use and are capable of operating at
5000 RPM with a 20-40 FPM feed rate.
We are pleased to provide this manual with the
Extreme Duty Planers. It was written to guide
you through assembly, review safety consider-
ations, and cover general operating procedures.
It represents our latest effort to produce the best
documentation possible.
If you have any criticisms that you feel we should
address in our next printing, please write to us at
the address below:
Grizzly Industrial, Inc.
C
⁄O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
Most important, we stand behind our machines.
We have an excellent Service Department at your
disposal should the need arise. If you have any
service questions or parts requests, please call or
write to us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the machine
as supplied when the manual was prepared.
However, owing to Grizzly’s policy of continuous
improvement, changes may be made at any time
with no obligation on the part of Grizzly. For your
convenience, we always keep current Grizzly
manuals available on our website at
www.griz-
zly.com. Any updates to your machine will be
reflected in these manuals as soon as they are
complete.
Read the manual before
assembly and operation.
Become familiar with the
machine and its opera
-
tion before beginning
any work. Serious per
-
sonal injury may result
if safety or operational
information is not under
-
stood or followed.
Description
Motor
Phase
Cutterhead
G9967
5 HP
1-Phase
4 Knife
G9967Z
5 HP
1-Phase
Spiral
G9740
7
1
⁄2 HP
3-Phase
4 Knife
G9740Z
7
1
⁄2 HP
3-Phase
Spiral
G9741
10 HP
3-Phase
4 Knife
G9961
10 HP
3-Phase
Spiral