Filter
Top Products
-12- 24" & 27" Resaw Bandsaws
Figure 6. Dust port installed.
Dust Port
To install the dust port:
1. Place the dust port on the saw and install it
with the included Phillips head screws as
shown in Figure 6.
Fence
Figure 5. Fence mounted on rail.
To mount the fence:
1. Loosen the lock knob and slide the fence
onto the rail.
2. Slide the fence beyond the center of the
table so the blade can be installed without
blocking the fence as shown in Figure 5.
3. Slip the blade through the slot in the table
and onto the bandsaw wheels, similar to how
the blade was installed before you removed
it. Make sure the blade teeth face downward
during installation.
4. Tension the blade enough to keep it on the
saw so it does not spring off during the rest
of the assembly process.