Filter
Top Products
-20-
H7760 2" x 27" Belt Sander & 6" Grinder
Many belts are available with different grit sizes.
To remove/replace a sanding belt:
1. DISCONNECT THE MACHINE FROM THE
POWER SUPPLY!
2. Remove the star knob from the right-hand
sanding belt cover as shown in
Figure 16,
and remove the cover
.
Replacing Belts
Figure 16. Star knob removed.
Figure 18. Removing sanding belt.
3. Loosen the sanding belt tension knob, as
shown in
Figure 17.
4. Pull the sanding belt tension knob down
with one hand and work the sanding belt off
the rollers with the other hand as shown in
Figure 18.
5. Install the new sanding belt in the reverse
order of removal and replace the belt cover.
6. Track the new sanding belt as shown on
Page 13 BEFORE turning the machine
ON.
Figure 17. Sanding belt tension knob.