Filter
Top Products
Model H7668 Spray Gun w/Pressure Cup -13-
The atomizing cap needs to be adjusted
for horizontal or vertical spraying patterns.
Spraying in the wrong direction may lead
to material build up on the atomizing cap
horn. Many performance problems are
caused by clogged atomizing holes on the
atomizing cap horns (see Cleaning on
Page 15).
Figure 12. Set up for horizontal stroke
direction with vertical fan pattern.
Figure 13. Set up for vertical spray stroke
with horizontal fan pattern.
Stroke
Figure 15. Fan patterns.
Rotating the pattern adjustment knob in
Figure 14 will give you a range between
the two patterns in Figure
15.
Stroke
Atomizing Cap and
Fan Adjustments
Holes
Figure 14. Pattern adjustment knob.
Pattern Adjustment Knob