Grizzly H8236 Staple Gun User Manual


 
Model H8236 2-Piece Brad Nailer/Stapler Kit
-4-
Operating this nailer/stapler can pro-
pel objects into the air, causing imme-
diate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when oper-
ating this equipment. In addition, this
nailer/stapler discharges at up to 85-
90 decibels. To protect your hearing,
always wear ANSI approved ear pro-
tection when operating this tool.
Never point this nailer/stapler at your-
self or another person! Always pay
attention to the direction this nailer/
stapler is pointed. Use these tools
with respect and caution to lessen
the possibility of operator or bystand-
er injury. Ignoring this warning may
result in serious personal injury.
Nailer/stapler accidents routinely
happen while moving the gun to
another location, such as up ladders,
to another room, or even another
job site. Always disconnect the gun
immediately after use and never
transport the gun while connected to
the air—even if the air compressor is
disconnected from its power source!
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individu-
al working conditions. Use this and
other tools with caution and respect.
Failure to do so could result in seri-
ous personal injury, damage to equip-
ment or poor work results.
Read the manual before operation.
Become familiar with this nailer/sta-
pler, its safety instructions, and its
operation before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.