Filter
Top Products
-32-
G0462 Wood Lathe (Mfd. Since 11/14)
H7924—6 pc. Chisel Set In Aluminum Box
This Lathe Chisel Sets high speed steel blades
and graceful ash handles provide plenty of control.
Handles measure 10" long and chisels measure
15
1
⁄2" long overall. Set includes a
3
⁄16" parting tool,
1
⁄2" round nose,
7
⁄8" skew,
3
⁄8" gouge,
1
⁄2" gouge,
and 1" gouge. All chisels are protected in a tough
aluminum case.
Figure 45. 6 pc. chisel set with aluminum case.
H0507—20" Hollowing Tool
H0508—24" Hollowing Tool
An excellent choice for blind turning or undercut-
ting where reach is restricted. H0507 is designed
for end grain use while H0508 (with a more sub-
stantial steel cross section) is designed for both
end grain and side grain (bowl) use.
Figure 46. Hallowing Tools.
H5954—Robert Sorby Stebcentre MT#2
Razor sharp teeth bite into the workpiece for
secure operation and the spring loaded center
point controls the amount of drive or slip. This pat-
ented feature helps avoid the problem of ‘dig-in’.
Production turners can also load and unload their
work while the lathe is still running!
Figure 47. MT#2 Stebcentre.
T10117—Big Mouth Dust Hood with Stand
Capture dust from any machine operation with
this Big Mouth Dust Hood. Simply attach a 4" dust
collection hose and adjust the hood right where
you need it. The free standing base eliminates
complicated machine set-ups and the tilting 16
3
⁄8"
x 12
7
⁄8" hood adjusts from 23" to 43" high. Every
shop needs one of these!
Figure 48. Dust collector with hood.