Filter
Top Products
G0562 3 HP Dust Collector -17-
Figure 18. Trimmed foam strip and collector
hook locations.
Figure 20. Lower collection bag installed.
3. Tighten the belt clamp around the narrow
foam strip to seal and secure the lower col-
lection bag (Figure 20).
Inlet
Components and Hardware Needed: Qty
7" Inlet w/Three 4" Ports ....................................1
Phillips Head Tap Screw #10 x
3
⁄8" ....................1
Tools Needed:
Phillips Screwdriver ............................................1
To install the inlet:
1. Insert the inlet over the impeller intake hole.
2. Secure the inlet in place with the Phillips
head tap screw (Figure 21).
Figure 21. Installed inlet.
Collector Hooks