Filter
Top Products
OPERATIONS
-16-
Once assembly is complete, the machine is
ready for a test run. The purpose of a test run is
to identify any unusual noises and vibrations, as
well as to confirm that the machine is perform-
ing as intended.
To test run the Model W1713, do these steps:
1. Make sure that all tools have been removed
from the scroll saw.
2. Turn the variable speed/power knob clock-
wise to turn the scroll saw ON.
3. Once the scroll saw is running, listen for any
unusual noises. The machine should run
smoothly with little or no vibrations.
• If there are any unusual noises or vibra-
tions, stop the scroll saw immediately by
pushing the paddle switch down.
4. Unplug the scroll saw and investigate the
source of the noise or vibration. DO NOT
make any adjustments to the scroll saw
while it is plugged in. The scroll saw should
not be run any further until the problems
are corrected.
THIS MACHINE produces
sawdust that may cause
allergic reactions or res-
piratory problems. Wear
a respirator in addition
to using a dust collector.
THIS MACHINE throws
wood chips and sawdust.
Wear safety glasses or a
face shield during all
operations.
KEEP loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Test Run
OPERATIONS