Filter
Top Products
G9984/G9985 Oscillating Belt Edge Sander -13-
Attaching the base supports to the main base:
1. Slide the base supports under the main
machine base.
2. Using (4) M10-1.5 x 30 hex bolts, (4) 10mm
flat washers, and (4) 10mm lock washers,
secure the main machine base to the base
supports as shown in Figure 7. Be sure the
lock washer is between the hex bolt head and
the flat washer when installing.
Base Supports
Figure 7. Attaching base supports to main base.
Bolt Here