Filter
Top Products
G9984/G9985 Oscillating Belt Edge Sander -7-
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Model
G9984/G9985 Oscillating Belt Edge Sander . The
Model G9984/G9985 is part of a growing Grizzly
family of fine woodworking machinery. When
used according to the guidelines set forth in this
manual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s com-
mitment to customer satisfaction.
The Model G9984 and G9985 are identical
machines except for the phase operation of the
motors. The Model G9984 is equipped with a 3
H.P., 220V single-phase motor and the Model
G9985 is equipped with a 3 H.P., 220V three-
phase motor.
Additional features of the Model G9984/G9985
include a 9" x 138
1
⁄2" sanding belt capacity, a
4150 F.P.M. belt speed, 8" of table height adjust-
ment,
1
⁄4" oscillation stroke, a 4" dust port and side
table for sanding curved pieces.
A number of sanding belts and accessories for the
Model G9984/G9985 are available through the
Grizzly catalog.
We are also pleased to provide this manual with
the Model G9984/G9985. It was written to guide
you through assembly, review safety considera-
tions, and cover general operating procedures. It
represents our effort to produce the best docu-
mentation possible. If you have any comments
regarding this manual, please write to us at the
address below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below:
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G9984/G9985 as supplied when the manual was
prepared. However, owing to Grizzly’s policy of
continuous improvement, changes may be made
at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, we urge you
to insert the new information with the old and keep
it for reference.
Commentary
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.