Filter
Top Products
-18- G9984/G9985 Oscillating Belt Edge Sander
The side table can be adjusted to accommodate
sanding at various angles. To adjust the angle
position of the side table:
1. Loosen the lock handle underneath the side
table shown in Figure 19.
2. Move the side table to the desired position.
3. While holding the side table in the desired
position, tighten the lock handle loosened in
Step 1.
Side Table Angle
Figure 19. Lock handle for side table angle.
The side table can be adjusted to accommodate a
wide range of workpieces. To adjust the side
table:
1. Loosen the lock handle shown in Figure 18.
2. Move the side table to the desired height.
3. While holding the side table at the desired
height, tighten the lock handle loosened in
Step 1.
Side Table Height
Figure 18. Lock handle for side table height.
Figure 17. Setting miter gauge to 90°.
Lock Handle
Lock Handle