Filter
Top Products
-14-
Model T26417/T26418 (Mfd. Since 11/13)
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
T26417 Inventory (Figure 3) Qty
A. Oscillating Sander ...................................... 1
B. Wrench Open-Ends 14-17mm .................... 2
C. Sanding Drums w/ Sanding Sleeves
–
3
⁄4" x 3
1
⁄2" ................................................... 1
–1" x 4
1
⁄2" .................................................... 1
–2" x 5
1
⁄2" .................................................... 1
D. Table Inserts
–1
1
⁄4" x 1
1
⁄4" .................................................. 1
–2
1
⁄4" x 2
1
⁄4" ................................................. 1
–1
1
⁄4" x 2
1
⁄8" ................................................. 1
–2
1
⁄4" x 3
5
⁄8" ................................................. 1
T26418 Inventory Box 2 (Figure 4) Qty
A. Oscillating Sander ...................................... 1
B. Wrench Open-Ends 19-22mm .................... 2
C. Sanding Drums w/ Sanding Sleeves
–
3
⁄4" x 4
1
⁄2" .................................................. 1
–2" x 9" ...................................................... 1
–3" x 9" ...................................................... 1
D. Table Inserts
–1
1
⁄4" x 1
1
⁄4" .................................................. 1
–2
3
⁄8" x 2
3
⁄8" ................................................ 1
–3
1
⁄2" x 3
1
⁄2" ................................................ 1
–1
1
⁄4" x 2
1
⁄8" ................................................. 1
–2
3
⁄8" x 3
5
⁄8" ................................................ 1
–3
1
⁄2" x 4
7
⁄16" ................................................ 1
E. Stand (Already Assembled in Picture) ........ 1
Figure 4. T26418 Inventory.
Figure 3. T26417 Inventory.
A
B
D
C
A
B
E
C
D