Filter
Top Products
Model T26417/T26418 (Mfd. Since 11/13)
-21-
4. Pull sanding drum and sleeve off of sanding
spindle.
5. Pull sanding sleeve off of sanding drum.
6. Re-assemble new sanding sleeve and sand-
ing drum.
Note: Sanding sleeve slides over sanding
drum easier if done prior to placing drum over
spindle.
7. Re-install sanding spindle assembly as illus-
trated in Figure 14.
8. Screw sanding spindle assembly into machine
spindle.
9. Tighten spindle hex nut until sanding drum
places slight pressure on sanding sleeve.
Figure 14. Assembly order.
Sanding Drum
Bottom Washer
Table
Insert
Sanding
Spindle
Spindle
Hex Nut
Top
Washer
Sanding
Sleeve
1. DISCONNECT MACHINE FROM POWER!
2. Secure sanding spindle in the machine spin-
dle or with a vice.
3. Remove sanding spindle hex nut and top
washer (see Figure 14).
Changing Spindle Sanding Sleeve