Filter
Top Products
Step 3: Apply a few drops of oil to the THROTTLE LEVER (#59) as shown in Figure 7. Work
the THROTTLE LEVER a few times to lubricate.
Throttle Lever (#59)
Throttle Lever Lock (#61)
Air Inlet
Figure 7 — Lubrication Points
Periodically check the condition of the GRINDING WHEEL (#45). If more than 1/2" of the
GRINDING WHEEL is gone, or if the circular lines in the top of the GRINDING WHEEL are no
longer visible, you must replace the GRINDING WHEEL with an approved replacement Wheel
from Harbor Freight Tools.
Page #10 -- SKU: 30304