Filter
Top Products
Step 4: Thread the FLANGE NUT (#46) onto the ARBOR. Tighten by hand.
Step 5: Place the WRENCH (#48) onto the flats of the ARBOR. You may have to turn the
ARBOR slightly to fit the WRENCH on.
Step 6: Insert the prongs of the WRENCH (#49) into the two holes in the FLANGE NUT as
shown in Figure 3.
Wrench (#48)
Grinding Wheel (#45)
Flange Nut (#46)
Wrench (#49)
Figure 3 — Securing the Grinding Wheel
Page #6 -- SKU: 30304