Filter
Top Products
Page 8SKU 3733 For technical questions, please call 1-800-444-3353.
situations that may occur. It must
be understood by the operator that
common sense and caution are fac-
tors which cannot be built into this
product, but must be supplied by the
operator.
Abrasive Cutting-Off Operation
Safety Warnings
This power tool is intended to 1.
function as a cut-off tool. Read all
safety warnings, instructions, illus-
trations and specications pro-
vided with this power tool. Failure
to follow all instructions listed below
may result in electric shock, re and/
or serious injury.
DO NOT EXPOSE TO RAIN OR USE 2.
IN DAMP LOCATIONS.
Specic Cautions:3.
Wear ANSI-Approved eye protection.a.
Use splash hood for every operation b.
for which it can be used.
Disconnect saw before servicing, c.
when changing cutting wheel and
cleaning.
Use only with smooth-edge cut-d.
ting wheels, free of openings and
grooves.
Replace damaged cutting wheel e.
before operating.
Operations such as grinding, 4.
sanding, wire brushing, polishing
are not recommended to be per-
formed with this power tool. Opera-
tions for which the power tool was not
designed may create a hazard and
cause personal injury.
Do not attempt to free a stalled 5.
blade without turning the Tile Saw
OFF rst. If the blade stalls, turn the
power switch to the OFF position im-
mediately to prevent damage to the
motor.
Do not use accessories which 6.
are not specically designed and
recommended by the tool manu-
facturer. Just because the accessory
can be attached to your power tool, it
does not assure safe operation.
The rated speed of the accessory 7.
must be at least equal to the maxi-
mum speed marked on the power
tool. Accessories running faster than
their RATED SPEED can break and
y apart.
The outside diameter and the 8.
thickness of your accessory must
be within the capacity rating of
your power tool. Incorrectly sized
accessories cannot be adequately
guarded or controlled.
Wear personal protective equip-9.
ment. Depending on application,
use face shield, safety goggles
or safety glasses. As appropriate,
wear dust mask, hearing protec-
tors, gloves and workshop apron
capable of stopping small abra-
sive or workpiece fragments. The
eye protection must be capable of
stopping ying debris generated by
various operations such as safely
goggles or glasses. The dust mask or
respirator must be capable of ltrating
particles generated by your opera-
tion. Prolonged exposure to high in-
tensity noise may cause hearing loss.
Keep bystanders a safe distance 10.
away from work area. Anyone
entering the work area must wear
personal protective equipment.