Filter
Top Products
No Part Name No Part Name
1 Screw 26 Brand
2 Washer 27 Washer
3 Stop Pin 28 Screw
4 Spring 29 Screw
5 Gear Box 30 Screw
6 Bearing 31 Cord Clip
7 Bearing Cover 32 Cord Armor
8 Screw 33 Cord
9 Pinion Gear 34 Side Handle
10 Armature 35 Axle Check Ring
11 Bearing 36 Bearing
12 Bearing Screw 37 Axle Check Ring
13 Fan Guide 38 Gear
14 Screw 39 Screw
15 Stator 40 Bearing Cover
16 Cabinet 41 Bearing
17 Brand 42 Output shaft
18 Brush Cap 43 Woodruff Key
19 Brush 44 Screw
20 Brush Holder 45 Packing Gland
21 Right Handle 46 Polishing Wheel
22 Alternation Switch 47 Flange Nut
23 Rubber Switch Cap 48 Fleece Pad
24 Switch 49 Wrench
25 Left Handle
MAINTENANCE
1. Inspect all of the mounting screws regularly as the unit produces up to 3400 rpms causing
vibration. Tighten if necessary.
2. Inspect the carbon Alternation Switch (#22) every six months. If it looks worn, have it replaced
by an authorized service representative.
3. Keep any liquid materials away from the motor.
4. After repeated use, Wool Bonnets will wear. Purchase new Wool Bonnets at Harbor Freight Tools.
# 41213 7
ELECTRIC POLISHER PARTS LIST